par ep | Oct 8, 2026 | Gearbox/Reducer
Sourcing a non-standard worm gearbox for the first time is not difficult — but it is different from buying a catalog unit. The catalog purchase follows a known process: find the frame size, confirm the ratio, submit a purchase order. The non-standard purchase requires... par ep | Oct 8, 2026 | Gearbox/Reducer
The most common decision point in industrial drive selection is not which worm gearbox to buy — it is whether a worm gearbox or a helical-bevel gearbox is the right technology for the application in the first place. Both are right-angle speed reducers. Both cover... par ep | Oct 8, 2026 | Gearbox/Reducer
Worm gearbox failures trace back to three recurring selection errors: an under-sized frame that overheats on continuous duty, an efficiency figure that was ignored when calculating output torque, and a service factor that was set to 1.0 on an application with daily... par ep | Oct 8, 2026 | Gearbox/Reducer
Industries that push machinery into unusual environments, unconventional output speeds, or demanding chemical and mechanical conditions generate the most frequent requests for non-standard worm gearboxes. Solar tracking systems need corrosion-resistant units at ratios... par ep | Oct 8, 2026 | Gearbox/Reducer
Every industrial worm gearbox in EPG Canada’s standard range was designed to fit the majority of applications. The majority is not all applications. When a machine’s spatial envelope won’t accept a standard center distance, when the required gear... par ep | Oct 8, 2026 | Gearbox/Reducer
Servo motors are only half of a precision drive system. The gearbox between the motor and the load determines whether the servo’s positioning capability is actually delivered to the output shaft — or lost in mechanical play, torsional compliance, and...