{"id":412,"date":"2026-03-17T02:42:18","date_gmt":"2026-03-17T02:42:18","guid":{"rendered":"https:\/\/metalite.net\/?post_type=product&p=412"},"modified":"2026-03-17T05:32:49","modified_gmt":"2026-03-17T05:32:49","slug":"tie-rod-hydraulic-cylinder-3000-psi","status":"publish","type":"product","link":"https:\/\/metalite.net\/ms\/product\/tie-rod-hydraulic-cylinder-3000-psi\/","title":{"rendered":"Tie Rod Hydraulic Cylinder 3000 PSI \u2013 Double Acting 2\u20135 Bore"},"content":{"rendered":"

<\/p>\n

\n

<\/p>\n

HZPT 3000 PSI Tie-Rod Hydraulic Cylinder \u2013 Double Acting, 3.5″\u20135″ Bore, Custom Stroke<\/h2>\n

Series: TR-3000PSI \u00a0|\u00a0 Max Working Pressure: 3,000 PSI \u00a0|\u00a0 Bore: 3.5″, 4″, 5″ \u00a0|\u00a0 Stroke: 4″\u201336″ \u00a0|\u00a0 Rod: Hard Chrome-Plated \u00a0|\u00a0 Piston: ASTM A536 Ductile Iron<\/p>\n

<\/p>\n

\u2714 3,000 PSI Max Pressure<\/span>
\n\u2714 Double Acting<\/span>
\n\u2714 ASTM A536<\/a> Ductile Iron Piston<\/span>
\n\u2714 Cold-Drawn Tube<\/span>
\n\u2714 ASAE Standard Mounting<\/span>
\n\u2714 2-Year Warranty<\/span><\/div>\n

<\/p>\n

Tie Rod Hydraulic Cylinder 3000 PSI Product Overview<\/h2>\n

The HZPT TR-3000PSI is a double-acting tie rod hydraulic cylinder rated for continuous operation at 3,000 PSI<\/strong>. Available in 3.5″, 4″, and 5″ bore sizes across stroke lengths from 4″ to 36″<\/strong>, this tie rod hydraulic cylinder covers the widest range of agricultural, construction, and industrial applications without compromising on material specification. Every bore-stroke combination is a stocked configuration \u2014 not a special order.<\/p>\n

The cylinder body is built from a cold-drawn steel tube<\/strong> with a tighter bore tolerance than hot-rolled alternatives, which directly extends O-ring and wiper seal service intervals. The piston is machined from ASTM A536 Grade 65-45-12 ductile iron<\/strong> \u2014 65,000 PSI tensile strength, 45,000 PSI yield, and 12% elongation before failure. That last number matters: gray cast iron fractures at under 1% elongation, meaning sudden impact loads can destroy it without warning. The ductile iron piston deforms visibly before it breaks.<\/p>\n

The ground-polished, hard chrome-plated rod resists seal scoring and corrosion across outdoor and washdown environments. A 1″ galvanized steel mounting pin<\/strong>, ductile iron inner clevis, and Grade 8 clamping nuts complete the assembly. Reinforced O-ring tube seals come installed. Select ASAE-designated models (suffix -ASAE) meet the American Society of Agricultural Engineers mounting standard for direct interchange on 8″ and 16″ stroke machines. Every unit ships with a 2-year parts warranty<\/strong> backed by stocked inventory.<\/p>\n

\"Tie

Tie Rod Hydraulic Cylinder 3000 PSI<\/p><\/div>\n

<\/p>\n

Tie Rod Hydraulic Cylinder 3000 PSI Technical Specifications \u2013 Full Model Range<\/h2>\n

All dimensions in inches. Column load calculated at minimum safety factor of 2, pin-to-pin mounting. NPT ports available on request.<\/p>\n

* ASAE = American Society of Agricultural Engineers \u2013 industry mounting standard for 8″ and 16″ stroke cylinders.<\/p>\n

\"\"<\/p>\n

3.5″ Bore Models<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Part Number<\/th>\nBore & Stroke<\/th>\nRetracted<\/th>\nExtended<\/th>\nRod Dia.<\/th>\nPin Size<\/th>\nPorts<\/th>\nColumn Load (lbs)<\/th>\nPressure (PSI)<\/th>\nWeight (lbs)<\/th>\n<\/tr>\n<\/thead>\n
TR30350411<\/td>\n3.5″ \u00d7 4″<\/td>\n14-1\/4″<\/td>\n18-1\/4″<\/td>\n1-3\/8″<\/td>\n1″<\/td>\nSAE 8<\/td>\n28,800<\/td>\n3,000<\/td>\n34<\/td>\n<\/tr>\n
TR30350611<\/td>\n3.5″ \u00d7 6″<\/td>\n16-1\/4″<\/td>\n22-1\/4″<\/td>\n28,800<\/td>\n3,000<\/td>\n37<\/td>\n<\/tr>\n
TR30350811<\/td>\n3.5″ \u00d7 8″<\/td>\n18-1\/4″<\/td>\n26-1\/4″<\/td>\n28,800<\/td>\n3,000<\/td>\n40<\/td>\n<\/tr>\n
TR30350811-ASAE*<\/td>\n3.5″ \u00d7 8″<\/td>\n20-1\/4″<\/td>\n28-1\/4″<\/td>\n1-1\/2″<\/td>\n28,800<\/td>\n3,000<\/td>\n41<\/td>\n<\/tr>\n
TR30351011<\/td>\n3.5″ \u00d7 10″<\/td>\n20-1\/4″<\/td>\n30-1\/4″<\/td>\n28,300<\/td>\n2,900<\/td>\n44<\/td>\n<\/tr>\n
TR30351211<\/td>\n3.5″ \u00d7 12″<\/td>\n22-1\/4″<\/td>\n34-1\/4″<\/td>\n28,700<\/td>\n2,900<\/td>\n47<\/td>\n<\/tr>\n
TR30351411<\/td>\n3.5″ \u00d7 14″<\/td>\n24-1\/4″<\/td>\n38-1\/4″<\/td>\n23,000<\/td>\n2,300<\/td>\n50<\/td>\n<\/tr>\n
TR30351612<\/td>\n3.5″ \u00d7 16″<\/td>\n26-1\/4″<\/td>\n42-1\/4″<\/td>\n18,800<\/td>\n1,900<\/td>\n53<\/td>\n<\/tr>\n
TR30351612-ASAE*<\/td>\n3.5″ \u00d7 16″<\/td>\n31-1\/2″<\/td>\n47-1\/2″<\/td>\n1-1\/4″<\/td>\n14,900<\/td>\n1,500<\/td>\n56<\/td>\n<\/tr>\n
TR30351812<\/td>\n3.5″ \u00d7 18″<\/td>\n28-1\/4″<\/td>\n46-1\/4″<\/td>\n1″<\/td>\n15,700<\/td>\n1,600<\/td>\n56<\/td>\n<\/tr>\n
TR30352012<\/td>\n3.5″ \u00d7 20″<\/td>\n30-1\/4″<\/td>\n50-1\/4″<\/td>\n13,300<\/td>\n1,300<\/td>\n60<\/td>\n<\/tr>\n
TR30352412<\/td>\n3.5″ \u00d7 24″<\/td>\n34-1\/4″<\/td>\n58-1\/4″<\/td>\n9,900<\/td>\n1,000<\/td>\n66<\/td>\n<\/tr>\n
TR30353012<\/td>\n3.5″ \u00d7 30″<\/td>\n40-1\/4″<\/td>\n70-1\/4″<\/td>\n6,800<\/td>\n700<\/td>\n76<\/td>\n<\/tr>\n
TR30353612<\/td>\n3.5″ \u00d7 36″<\/td>\n46-1\/4″<\/td>\n82-1\/4″<\/td>\n4,900<\/td>\n500<\/td>\n85<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

<\/p>\n

4″ Bore Models<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Part Number<\/th>\nBore & Stroke<\/th>\nRetracted<\/th>\nExtended<\/th>\nRod Dia.<\/th>\nPin Size<\/th>\nPorts<\/th>\nColumn Load (lbs)<\/th>\nPressure (PSI)<\/th>\nWeight (lbs)<\/th>\n<\/tr>\n<\/thead>\n
TR30400412<\/td>\n4″ \u00d7 4″<\/td>\n14-1\/4″<\/td>\n18-1\/4″<\/td>\n1-1\/2″<\/td>\n1″<\/td>\nSAE 8<\/td>\n37,600<\/td>\n3,000<\/td>\n41<\/td>\n<\/tr>\n
TR30400612<\/td>\n4″ \u00d7 6″<\/td>\n16-1\/4″<\/td>\n22-1\/4″<\/td>\n37,600<\/td>\n3,000<\/td>\n45<\/td>\n<\/tr>\n
TR30400812<\/td>\n4″ \u00d7 8″<\/td>\n18-1\/4″<\/td>\n26-1\/4″<\/td>\n37,600<\/td>\n3,000<\/td>\n49<\/td>\n<\/tr>\n
TR30400812-ASAE*<\/td>\n4″ \u00d7 8″<\/td>\n20-1\/4″<\/td>\n28-1\/4″<\/td>\n37,600<\/td>\n3,000<\/td>\n50<\/td>\n<\/tr>\n
TR30401012<\/td>\n4″ \u00d7 10″<\/td>\n20-1\/4″<\/td>\n30-1\/4″<\/td>\n37,600<\/td>\n3,000<\/td>\n52<\/td>\n<\/tr>\n
TR30401212<\/td>\n4″ \u00d7 12″<\/td>\n22-1\/4″<\/td>\n34-1\/4″<\/td>\n37,600<\/td>\n3,000<\/td>\n56<\/td>\n<\/tr>\n
TR30401412<\/td>\n4″ \u00d7 14″<\/td>\n24-1\/4″<\/td>\n38-1\/4″<\/td>\n37,600<\/td>\n3,000<\/td>\n60<\/td>\n<\/tr>\n
TR30401614<\/td>\n4″ \u00d7 16″<\/td>\n26-1\/4″<\/td>\n42-1\/4″<\/td>\n37,600<\/td>\n3,000<\/td>\n64<\/td>\n<\/tr>\n
TR30401614-ASAE*<\/td>\n4″ \u00d7 16″<\/td>\n31-1\/2″<\/td>\n47-1\/2″<\/td>\n1-1\/4″<\/td>\n37,600<\/td>\n3,000<\/td>\n68<\/td>\n<\/tr>\n
TR30401814<\/td>\n4″ \u00d7 18″<\/td>\n28-1\/4″<\/td>\n46-1\/4″<\/td>\n1-3\/4″<\/td>\n1″<\/td>\n37,600<\/td>\n3,000<\/td>\n68<\/td>\n<\/tr>\n
TR30402014<\/td>\n4″ \u00d7 20″<\/td>\n30-1\/4″<\/td>\n50-1\/4″<\/td>\n35,000<\/td>\n2,700<\/td>\n72<\/td>\n<\/tr>\n
TR30402414<\/td>\n4″ \u00d7 24″<\/td>\n34-1\/4″<\/td>\n58-1\/4″<\/td>\n26,000<\/td>\n2,000<\/td>\n80<\/td>\n<\/tr>\n
TR30403016<\/td>\n4″ \u00d7 30″<\/td>\n40-1\/4″<\/td>\n70-1\/4″<\/td>\n2″<\/td>\n17,900<\/td>\n1,400<\/td>\n92<\/td>\n<\/tr>\n
TR30403616<\/td>\n4″ \u00d7 36″<\/td>\n46-1\/4″<\/td>\n82-1\/4″<\/td>\n13,000<\/td>\n1,000<\/td>\n104<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

<\/p>\n

5″ Bore Models<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Part Number<\/th>\nBore & Stroke<\/th>\nRetracted<\/th>\nExtended<\/th>\nRod Dia.<\/th>\nPin Size<\/th>\nPorts<\/th>\nColumn Load (lbs)<\/th>\nPressure (PSI)<\/th>\nWeight (lbs)<\/th>\n<\/tr>\n<\/thead>\n
TR30500416<\/td>\n5″ \u00d7 4″<\/td>\n16-1\/4″<\/td>\n20-1\/4″<\/td>\n2″<\/td>\n1-1\/4″<\/td>\nSAE 8<\/td>\n58,900<\/td>\n3,000<\/td>\n71<\/td>\n<\/tr>\n
TR30500616<\/td>\n5″ \u00d7 6″<\/td>\n18-1\/4″<\/td>\n24-1\/4″<\/td>\n58,900<\/td>\n3,000<\/td>\n76<\/td>\n<\/tr>\n
TR30500816-ASAE*<\/td>\n5″ \u00d7 8″<\/td>\n22-1\/4″<\/td>\n30-1\/4″<\/td>\n58,900<\/td>\n3,000<\/td>\n81<\/td>\n<\/tr>\n
TR30501016<\/td>\n5″ \u00d7 10″<\/td>\n22-1\/4″<\/td>\n32-1\/4″<\/td>\n58,900<\/td>\n3,000<\/td>\n86<\/td>\n<\/tr>\n
TR30501216<\/td>\n5″ \u00d7 12″<\/td>\n24-1\/4″<\/td>\n36-1\/4″<\/td>\n58,900<\/td>\n3,000<\/td>\n91<\/td>\n<\/tr>\n
TR30501416<\/td>\n5″ \u00d7 14″<\/td>\n26-1\/4″<\/td>\n40-1\/4″<\/td>\n58,900<\/td>\n3,000<\/td>\n96<\/td>\n<\/tr>\n
TR30501616<\/td>\n5″ \u00d7 16″<\/td>\n28-1\/4″<\/td>\n44-1\/4″<\/td>\n58,900<\/td>\n3,000<\/td>\n101<\/td>\n<\/tr>\n
TR30501616-ASAE*<\/td>\n5″ \u00d7 16″<\/td>\n31-1\/2″<\/td>\n47-1\/2″<\/td>\n58,900<\/td>\n3,000<\/td>\n104<\/td>\n<\/tr>\n
TR30501816<\/td>\n5″ \u00d7 18″<\/td>\n30-1\/4″<\/td>\n48-1\/4″<\/td>\n58,900<\/td>\n3,000<\/td>\n106<\/td>\n<\/tr>\n
TR30502016<\/td>\n5″ \u00d7 20″<\/td>\n32-1\/4″<\/td>\n52-1\/4″<\/td>\n55,200<\/td>\n2,800<\/td>\n112<\/td>\n<\/tr>\n
TR30502416<\/td>\n5″ \u00d7 24″<\/td>\n36-1\/4″<\/td>\n60-1\/4″<\/td>\n41,500<\/td>\n2,100<\/td>\n122<\/td>\n<\/tr>\n
TR30503016<\/td>\n5″ \u00d7 30″<\/td>\n42-1\/4″<\/td>\n72-1\/4″<\/td>\n28,800<\/td>\n1,400<\/td>\n137<\/td>\n<\/tr>\n
TR30503616<\/td>\n5″ \u00d7 36″<\/td>\n48-1\/4″<\/td>\n84-1\/4″<\/td>\n21,200<\/td>\n1,000<\/td>\n153<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

* NPT ports available as an alternative to SAE. Column load is max pushing load at safety factor \u2265 2, pin-to-pin. * ASAE = American Society of Agricultural Engineers standard for 8″ and 16″ stroke interchange.<\/p>\n

<\/p>\n

What Is a Tie Rod Hydraulic Cylinder \u2014 and When Do You Need 3,000 PSI?<\/h2>\n

A tie rod hydraulic cylinder converts fluid pressure into straight-line mechanical force. Four external steel rods clamp the end caps against the barrel, creating a fully rebuildable assembly \u2014 remove the tie rod nuts and the entire cylinder disassembles in the field without special tooling. This is the defining advantage over welded designs, which must be scrapped when seals fail.<\/p>\n

The double-acting<\/strong> design of the TR-3000PSI means hydraulic fluid drives both the extend and retract strokes under power. This is essential wherever the return stroke must do work: closing a dump trailer, retracting a splitter wedge, or pulling a loader linkage back against load. Single-acting cylinders rely on gravity or a spring for return \u2014 acceptable only when the return stroke carries no load.<\/p>\n

At 3,000 PSI, a 5″ bore cylinder delivers 58,900 lbs of push force<\/strong>. A 3.5″ bore at the same pressure delivers 28,800 lbs<\/strong>. These figures are calculated at rated pressure \u2014 the actual numbers you can use when sizing the cylinder against your application load, with no marketing inflation applied.<\/p>\n

<\/p>\n

Where the TR-3000PSI Tie Rod Hydraulic Cylinder IGets Used<\/h2>\n
\n
\n

\ud83d\ude9c Farm Equipment<\/p>\n

Front loader arms, three-point hitch lift cylinders, bale handlers, and grain auger positioning. ASAE-designated models replace OEM cylinders on 8″ and 16″ stroke machines without modification.<\/p>\n<\/div>\n

\n

\ud83c\udfd7\ufe0f Construction & Transport<\/p>\n

Dump trailer hoists, flatbed tipping cylinders, skid steer attachment actuators, and concrete form bracing. The 4″ \u00d7 8″ at 3,000 PSI delivers 37,600 lbs \u2014 enough for most light commercial dump trailer hoist requirements.<\/p>\n<\/div>\n

\n

\ud83e\udeb5 Log Splitting & Forestry<\/p>\n

Commercial and industrial log splitters, firewood processor feed tables, and stump grinder feed arms. Double-acting operation is required to power the retract stroke and clear split material under load.<\/p>\n<\/div>\n<\/div>\n

<\/p>\n

Tie Rod Hydraulic Cylinder 3000 PSI Installation Guide<\/h2>\n

Estimated time: 30\u201390 minutes depending on machine access. Fully depressurize the hydraulic circuit before starting. Eye protection required when handling hydraulic fittings.<\/p>\n

    \n
  1. Depressurize the system<\/strong> \u2014 Shut down the power unit. Cycle the control valve 4\u20135 times to release stored pressure from both cylinder ports. Confirm zero gauge pressure before touching any fittings.<\/li>\n
  2. Disconnect hydraulic hoses<\/strong> \u2014 Remove hoses from both ports. Cap every open port and hose end immediately. A single unprotected port exposed to dirt for 10 minutes can introduce contamination that scores the bore within 20 hours of operation.<\/li>\n
  3. Document the orientation<\/strong> \u2014 Photograph the cylinder’s port orientation, pin alignment, and mounting position before removal. Most installation errors on replacement tie rod hydraulic cylinders trace back to incorrectly assumed orientations, not part defects.<\/li>\n
  4. Remove the old cylinder<\/strong> \u2014 Extract the 1″ mounting pins from both clevis ends. Support the cylinder weight before pulling the last pin to avoid dropping it on hose connections below.<\/li>\n
  5. Check mounting hardware<\/strong> \u2014 Inspect the pin bores at both mount points. Wear beyond 0.010″ over nominal diameter will introduce side loading on the new rod seal, cutting service life by 30\u201350%. Replace worn hardware before installing the new cylinder.<\/li>\n
  6. Install the HZPT cylinder<\/strong> \u2014 Align the cylinder axis with the centerline of the load. A 5\u00b0 angular misalignment applies a continuous side load to the rod \u2014 enough to halve seal life on high-cycle applications. Insert the 1″ galvanized pins and torque Grade 8 clamping nuts to 75\u201385 ft-lb<\/strong>.<\/li>\n
  7. Connect hydraulic hoses<\/strong> \u2014 Route the cap-end hose to the cap-end port, and the rod-end hose to the rod-end port. Reversing these on a double-acting cylinder causes uncontrolled cylinder motion when the system pressurizes. Torque SAE 8 fittings to 37\u201344 ft-lb<\/strong>.<\/li>\n
  8. Bleed and test at low pressure<\/strong> \u2014 Start the power unit at idle. Slowly extend and retract the cylinder through 3 full cycles to purge air. Check all fittings for seepage before increasing to operating pressure.<\/li>\n
  9. Full-pressure hold test<\/strong> \u2014 Bring the system to working pressure. Hold at full extension and full retraction for 30 seconds each. No drift, no rod seal weeping, no fitting leaks = ready for service.<\/li>\n<\/ol>\n

    <\/p>\n

    Commonly Ordered With This Tie Rod Hydraulic Cylinder<\/h2>\n
    \n
    \n

    Cylinder Seal Rebuild Kit<\/p>\n

    Full NBR seal set per bore size: piston O-rings, rod seal, wiper seal, and backup rings. A rebuild takes 45 minutes and costs roughly 8% of a new cylinder. Stocking one kit per machine eliminates a 3\u20135 day parts wait when seals eventually wear.<\/p>\n

    Recommended pairing\u2192<\/span><\/p>\n<\/div>\n

    \n

    4-Way 3-Position Directional Control Valve<\/p>\n

    SAE 8-ported, spring-centered, 3,500 PSI rated. An undersized valve creates a measurable pressure drop that reduces effective cylinder force by 10\u201320% and generates heat that degrades hydraulic fluid 3\u00d7 faster than proper sizing.<\/p>\n

    Recommended pairing\u2192<\/span><\/p>\n<\/div>\n<\/div>\n

    <\/p>\n

    Frequently Asked Questions<\/h2>\n
    \n
    \n

    Q1: What does the -ASAE suffix mean, and do I need it?<\/p>\n<\/div>\n

    \n

    ASAE designates the American Society of Agricultural Engineers mounting standard. ASAE-suffix models have a longer retracted length than standard models of the same bore and stroke \u2014 for example, the TR30350811-ASAE retracts to 20-1\/4″ vs. 18-1\/4″ for TR30350811. This extended pin-to-pin distance matches the OEM mounting footprint on tractors and implements designed to the ASAE standard. If you’re replacing an OEM cylinder on a name-brand tractor or implement, measure the current retracted length before ordering and match it to the appropriate suffix.<\/p>\n<\/div>\n<\/div>\n

    \n
    \n

    Q2: Why does column load drop significantly at longer stroke lengths?<\/p>\n<\/div>\n

    \n

    Column load (push force capacity) decreases with stroke because the exposed rod acts as a column under compressive load. At 3.5″ \u00d7 4″ stroke the column load is 28,800 lbs; at 3.5″ \u00d7 36″ it drops to 4,900 lbs \u2014 the same bore and pressure rating. This is Euler column buckling: as the unsupported rod length increases, its resistance to lateral bending under axial load falls sharply. This is why bore and stroke must both be matched to the application load, not just bore and pressure.<\/p>\n<\/div>\n<\/div>\n

    \n
    \n

    Q3: What hydraulic fluid is compatible with the standard seals?<\/p>\n<\/div>\n

    \n

    Standard NBR seals are compatible with petroleum-based mineral hydraulic fluids: ISO VG 32, 46, and 68. They are not compatible with phosphate ester, water-glycol, or synthetic ester fluids. For biodegradable or fire-resistant fluid applications, specify FKM (Viton) seals at the time of order \u2014 this is a factory option. Do not attempt to substitute seal materials in the field as the bore dimensions differ between NBR and FKM profiles.<\/p>\n<\/div>\n<\/div>\n

    \n
    \n

    Q4: How do I read the part number to confirm I’m ordering correctly?<\/p>\n<\/div>\n

    \n

    The part number format is TR30 + [bore code] + [stroke code] + [rod diameter code]. Example: TR30401212 = TR-3000PSI series, 4″ bore, 12″ stroke, 1-1\/2″ rod. The two-digit bore code is the bore in tenths of an inch \u00d7 10 (35 = 3.5″, 40 = 4.0″, 50 = 5.0″). The four-digit stroke-rod suffix encodes stroke length and rod size. If in doubt, contact our sales team with your bore, stroke, and retracted length \u2014 we’ll confirm the exact part number before your order ships.<\/p>\n<\/div>\n<\/div>\n

    \n
    \n

    Q5: What does the 2-year warranty cover and how do I make a claim?<\/p>\n<\/div>\n

    \n

    The warranty covers manufacturing defects in materials and workmanship for 24 months from purchase date \u2014 tube bore defects, rod surface defects, hardware failures under rated load. It does not cover damage from contaminated fluid, operation above 3,000 PSI, angular misalignment, or incorrect fluid compatibility. Replacement parts are in stock and dispatch within 1 business day of an approved claim. To file: submit your part number, purchase date, and failure description via our warranty form. Average resolution time is 3 business days.<\/p>\n<\/div>\n<\/div>\n

    <\/p>\n

    What Customers Are Saying Tie Rod Hydraulic Cylinder 3000 PSI<\/h2>\n
    \n
    \n

    \u2605\u2605\u2605\u2605\u2605<\/p>\n

    “We maintain 22 dump trailers for a regional aggregates operation. Our previous supplier’s cylinders were averaging 14 months before rod seal failure \u2014 mostly from contaminated fluid on job sites. We switched to HZPT TR30401214 units 18 months ago. Zero seal failures so far. The chrome-plated rod finish is visibly smoother than what we were using before, and the cold-drawn tube bore held tolerance through our first rebuild on a high-hour unit. At our volume, the B2B pricing cut our cylinder cost by 38% per unit versus the dealer.”<\/p>\n

    \u2014 Travis H., Fleet Manager, Great Plains Aggregate Transport<\/p>\n<\/div>\n

    \n

    \u2605\u2605\u2605\u2605\u2605<\/p>\n

    “My log splitter cylinder gave up the ghost on the last Saturday in October. If you’ve never stood in a field staring at 4 cords of unsplit oak with winter two weeks away, I don’t recommend it for your mental health. Ordered the TR30352012 Thursday afternoon. It arrived Friday. I installed it Saturday morning before my second cup of coffee \u2014 the ASAE mounting dimensions matched my John Deere loader port spacing exactly. By noon I was splitting wood. By evening I was insufferably telling everyone about it. The chrome rod is still mirror-smooth after six full cords. 10\/10, would panic-order again.”<\/p>\n

    \u2014 Randy W., Hobby Farmer & Occasional Hydraulic Mechanic, central Iowa<\/p>\n<\/div>\n<\/div>\n

    <\/p>\n

    \n

    40+ Models In Stock. Find Your Bore and Stroke.<\/h2>\n

    3.5″, 4″, and 5″ bore. 4″ to 36″ stroke. ASAE-standard and non-ASAE. Every configuration is a stocked part \u2014 not a build-to-order. B2B pricing available for orders of 10+ units.<\/p>\n


    \nGet a Quote Now
    \n<\/a>
    \n
    \nContact B2B Sales
    \n<\/a><\/div>\n

    2-year warranty \u00b7 Stocked seal rebuild kits \u00b7 FKM seal option \u00b7 NPT ports available \u00b7 Ships 3\u20135 business days<\/p>\n<\/div>\n

    <\/p>\n<\/div>","protected":false},"excerpt":{"rendered":"

    The HZPT tie rod hydraulic cylinder is a 3000 PSI double-acting cylinder designed for agriculture, construction, and industrial machinery. Available in 2″\u20135″ bore sizes, it features a chrome-plated rod, ductile iron piston, and rebuildable tie-rod structure for reliable linear force and long service life.<\/p>","protected":false},"featured_media":414,"template":"","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":""},"product_brand":[],"product_cat":[28,21],"product_tag":[29],"class_list":{"0":"post-412","1":"product","2":"type-product","3":"status-publish","4":"has-post-thumbnail","6":"product_cat-agricultural-machinery-hydraulic-cylinder","7":"product_cat-hydraulic-cylinders","8":"product_tag-hydraulic-cylinders","10":"first","11":"instock","12":"shipping-taxable","13":"product-type-simple"},"_links":{"self":[{"href":"https:\/\/metalite.net\/ms\/wp-json\/wp\/v2\/product\/412","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/metalite.net\/ms\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/metalite.net\/ms\/wp-json\/wp\/v2\/types\/product"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/metalite.net\/ms\/wp-json\/wp\/v2\/media\/414"}],"wp:attachment":[{"href":"https:\/\/metalite.net\/ms\/wp-json\/wp\/v2\/media?parent=412"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/metalite.net\/ms\/wp-json\/wp\/v2\/product_brand?post=412"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/metalite.net\/ms\/wp-json\/wp\/v2\/product_cat?post=412"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/metalite.net\/ms\/wp-json\/wp\/v2\/product_tag?post=412"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}